Ok, This here is a Garage Door Hinge. It bolts onto the Garage door to simulate a hinge on the garage.
This was made from MDF it appears. The moisture got to it and it started separating like paper.
So I'll be replicating this piece into 2 pieces one for either side. Unfortunately I probably won't be getting a finished product ON The garage itself. But I'll be showing the final product.
To tackle this Job i believe the Band saw will be the best option for this, it is probably close to 24" long and around 6" wide. My Scroll saw will only go 16" so will be to long unless i can do it such a way by doing it half and half.
Running the bottom half on the left side and the right side. Then reversing it form the bottom and doing the left and right and meet in the middle.
Guess we'll see how that works out. if anything, I can use a Jig Saw to cut it out.
The customer will be purchasing 1/2" Ply in order to get this cut out.
No comments:
Post a Comment